|
|
|
CTB-100 Multi-standard Timebase Corrector
Ultimate Stabiliser |
We think this is the ultimate video stabiliser! Also known as AVT-8710 | |
Multistandard |
Works with PAL and NTSC (and their variants) as well as SECAM | |
What does it do? |
- It totally ELIMINATES
non-standard "junk" pulses which cause the picture to go light and dark and/or
unstable, making the picture 100% standard again. - STABILISES the jitters and amplitude variations that you get, e.g. when playing a tape or DVD. - Completely REGENERATES new, stable sync pulses and colourburst for the cleanest video signal you're ever likely to get. - Allows you to adjust the brightness, contrast, colour saturation, tint (NTSC only) and sharpness so that YOU CONTROL THE PICTURE QUALITY. |
|
How do you use it? |
Just plug it in-line with the COMPOSITE or S-VIDEO output of your VCR or DVD player, connect the power supply and then you are in control of your video quality. | |
How does it work? |
The CTB-100 is a digital instrument. The input video is sampled into memory in real-time, manipulated digitally to automatically remove unwanted pulses, timing errors and level variations, adjusted to your requirements and then converted back to analogue composite and s-video with completely new and rock-solid broadcast-standard sync. | |
What's a timebase corrector? |
Read this article to find out why you need one. | |
SPECIFICATIONS |
||
|---|---|---|
Input |
||
VIDEO in |
Composite video: RCA/Phono x1 S-Video: Mini 4pin DIN x 1 (over-rides composite input if both connected) 0.5Vp-p to 2Vp-p |
|
| Standards | NTSC3.58, NTSC4.43, PAL, PAL M,
PAL N, SECAM Selection: Automatic sensing or manual control |
|
| Adjustments | Brightness, contrast, colour saturation, tint (ntsc only), sharpness. All adjustments can be reset to default values either individually or globally. Settings are remembered with power off. | |
Output |
||
| VIDEO out | Nominal 1Vp-p // 75 Ohm Composite video: RCA/Phono x 1 S-Video: Mini 4pin DIN x 1 Both outputs are useable simultaneously. |
|
| Standards | Output standard is always the same as the input standard | |
General |
||
| Indicators | Top panel led's for input standard | |
| Top panel led's for adjustment selection | ||
| Controls | Four push-buttons | |
| Power Supply | Australian-approved external dc supply provided | |
| Size & Weight | 145mm(W) x 95mm(D) x 34mm(H), 300g (unit only) | |
Rear Panel Connections
