|
|
|
CYP model CTB-530 High Resolution
Multi-standard Time Base Corrector
Also - NEW RACK-MOUNT VERSION... CTB-530R
CTB-530R - Front panel
Rear Panel of CTB-530R
Multi-standard |
The CYP CTB-530 TBC accepts PAL, PALM, PALN, NTSC, NTSC443 & SECAM input as Composite or S-Video, resamples and stabilises the signal also removing all non-standard content (sometimes referred to as "piggy-back" pulses) to output the same standard as the input signal. Standard selection can be Automatic or Manual. | |
S-Video (Y/C) |
Because the CTB-530 has S-Video inputs the higher picture quality of S-Video is maintained. A digital comb-filter converts Composite video input to high quality Y/C for internal processing. | |
Steady Levels |
An automatic gain control (AGC) keeps the video output levels normal even if the input level is high or low or changing. | |
Two Inputs |
There are two inputs. Each can be Composite or S-Video. Audio has not been forgotten either... Two stereo inputs are provided so that the audio is switched with the video. Note that no audio processing takes place. | |
S-Video, Composite |
All three outputs are present simultaneously. | |
Adjustments |
Front-panel user-adjustable settings for Brightness, Contrast, Colour Saturation, Tint (NTSC only), Pattern Generator, *H timing and *Chroma shift are provided. *Genlock mode only. | |
Colour Bars |
When there is no input, the CTB-530 outputs 100% colour bars in the selected output standard. You can also select from Black or six other colours including White if you do not want the colour bars. | |
Genlock |
The CTB-530 also provides a loop-through genlock input and front-panel adjustment of H timing to allow the outputs of two or more CTB-530s to be locked together using an external reference. In genlock mode the chroma can be shifted up and down 3 lines to compensate for colour-bleed. | |
SPECIFICATIONS |
||
| INPUTS | ||
| Video in | 1Vp-p nom // 75 Ohm, BNC x2 | |
| Y/C in | Y = 0.7Vp-p nom, C = 0.7Vp-p nom, 4 pin mini DIN, 75 Ohms ea. x 2 | |
| Audio in | Stereo = 0dBu max, RCA / Phono x 2 | |
| OUTPUTS | (Note: All outputs can be used at the same time) |
|
| Video out | 1Vp-p nom, 75 Ohms, BNC x 1 | |
| S-Video out | Y = 0.7Vp-p nom, C = 0.7Vp-p nom, 4 pin mini DIN, 75 Ohms x 1 | |
| YUV out | Y = 1.0Vp-p nom, R-Y & B-Y = 0.7Vp-p nom, BNC's, 75 Ohms ea. x 1set | |
| Controls | Switch selection of input 1 or input 2 | |
| Switch selection of input standard - Auto / System (PAL, PALM, PALN, NTSC, NTSC443 & SECAM) | ||
| Switch selection of adjustment - Brightness, Contrast, Saturation, Tint (NTSC only), H timing & V timing (when genlock input present only) and +/- buttons for making adjustments (press both for default setting). | ||
| Rear panel 75 ohm termination switch for Genlock input. | ||
| Rear panel Power switch | ||
| Indicators | 7 x front panel led's for selected standard and Auto / System | |
| 2 x front panel led's for Input 1 and 2 | ||
| 4 x front panel multi-colour led's for adjustments | ||
| Power Supply | External mains supply (Australian approved supply provided) | |
| Size & Weight | 300mm(W) x 242mm(overall D) x 55mm(H), 2Kg unit only, 2.6Kg packed | |
CTB-530 Rear panel
