QP Easy-terminating Adaptors
** Made in Australia **
Inexpensive
Already proven in hundreds of installations
No soldering required

These very shallow modules only require 20mm behind plate
leaving plenty of room for cables when mounting on
standard electrical surface-mounting blocks.

Miniature terminal blocks dramatically reduce size
allowing several modules to mount on a single plate.

The most common types appear below.
We do have others and will also respond to
special requests if economically viable.

QP4G Female HD15 socket for VGA, terminal blocks for all cable connections. Mounts directly onto our range of plates. Supplied with threaded hex-posts. All connections are clearly printed. Use with our HQ cable.

QP4A 3.5mm Stereo Audio socket with Mono / Stereo link. Can be used for input or output. No guesswork, connections are clearly printed. Supplied with ring nut and drilling template. Use with SAC20 / SAC24 / SAC28 shielded audio cable.

QP4AG Female HD15 socket for VGA, 3.5mm Stereo socket for audio. Mono/Stereo link, use for i/p or o/p, won't short-circuit. Terminal blocks for all cable connections. Mounts directly onto our PLATE04. Supplied with threaded hex-posts and ring nut. All connections are clearly printed. Use with our HQ cable and SAC20/24/28 audio cable.

QP4C Yellow RCA/Phono socket for Composite Video. Terminal block for single co-ax cable. Connections are clearly printed. Supplied with mounting screws and drilling template. Use with our CV75SH, CV75MH or one strand of CVS8 cable up to 100Mtrs.

HQP2 Female D15HD with hexposts to female D15HD socket ready to mount on one of our plates. Made from our HQ08 cable. Length approximately 200mm. Only 20mm required behind plate! Use with our range of HQxK cables, available up to 30 Mtrs. Just plug end of cable into the HQP2 and mount on a plate.